TMP36 Analog Temperature Sensor

The TMP36 was my first sensor and is pretty simple. 3 pins, 1 analog port.

Available from SparkFun.

It’s a low voltage temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to provide a typical accuracy of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range. Give the it a ground and 2.7 to 5.5 VDC and read the voltage on the Vout pin. The output voltage can be converted to temperature easily using the scale factor of 10 mV/°C. For Example:

Continue reading “TMP36 Analog Temperature Sensor”

Tri-Temp Project Intro

Description

This is the Tri-Temp project. It comes in two flavors- Standard and Ethernet. The Standard version outputs all readings on an LCD. The Ethernet adds output to HTML via a web browser. I did not design this to use an Ethernet shield- only the Arduino Ethernet- it’s more compact.So what’s this all about? Reading the Temp and Humidity! Nothing special going on here, just reading the digital data from three DHT22 sensors and displaying it.

Continue reading “Tri-Temp Project Intro”